Batts have dropped out of the joist bays
As the coordinated steps continue, water adds weight the insulation hangers were never sized for, so a batt slides free and lands face down.
Specialty cleanup
Texas
Our incident command team removes saturated insulation that cannot dry safely, exposes the cavity for cleaning, and supports faster structural drying.
Signs to look for
As the coordinated steps continue, if you notice any of these problems, call us before water has more time to spread into nearby materials.
As the coordinated steps continue, water adds weight the insulation hangers were never sized for, so a batt slides free and lands face down.
As the coordinated steps continue, dry loose fill is even and lofted.
With the scene stabilized, insulation only works while it holds air in its structure.
From the first status check, that paper is a vapor retarder, and it fails once it has been soaked and dried.
To keep the incident under control, a visible dirt line means the water carried sediment, so this was not clean water.
To keep the incident under control, encapsulated batts are sealed in plastic, which keeps water in as effectively as it keeps it out.
What happens
Our incident command team adjusts the work to which materials took on water, how far the water traveled, and which materials can be saved.
As the coordinated steps continue, every insulation type in the wet zone is identified and given a call: out, or dried and kept.
To keep the incident under control, we meter and mark the boundary of the area inside the incident zone so removal stops where the water stopped.
To keep the incident under control, loose fill cellulose and blown fiberglass are pulled through an insulation vacuum hose into filter bags or a truck outside.
To keep the incident under control, wet batts go straight into bags where they hang, sealed before they travel.
With the scene stabilized, in walls, insulation comes out through the drywall opening while the wall cavity is exposed.
As the coordinated steps continue, sagging floor batts come down along with the wire hangers and supports holding them.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
From the first status check, here is how we usually handle wet insulation removal near Texas.
To keep the incident under control, we ask which materials took on water, what the water was, and what type of insulation is in each area.
Your callTo keep the incident under control, attics and crawl spaces are crew tasks, not homeowner tasks.
Before we arriveTo keep the incident under control, the technician identifies each material, takes readings, and tells you which sections come out and which can be dried and kept.
On arrivalWith the scene stabilized, pathways and floors are covered, the work area is closed off, and the insulation vacuum and filter bags are set up outside where possible.
First hourWith the scene stabilized, loose fill is vacuumed, batts are bagged where they sit, and saturated open cell foam is cut back.
Same visitTo keep the incident under control, framing, sheathing and joist bays are HEPA vacuumed, and hangers, staples and debris come out.
Same visitWith the scene stabilized, sealed bags are carried out on the protected route and loaded by container. As the coordinated steps continue, weights and photographs go into the incident file, because wet insulation volume is a real line on a claim.
End of visitUnderstanding the cost
As the coordinated steps continue, we explain the recommended work and price before you approve the job. As the coordinated steps continue, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Wet insulation removal and disposal, per square foot | As the coordinated steps continue, national estimate covering removal, bagging and haul away. To keep the incident under control, replacement is priced separately. | $1.00 to $2.50 |
| Whole attic blown in insulation vacuumed out, 1,000 to 1,500 square feet | From the first status check, national estimate for vacuum removal with sealed work area and filter bags. | $1,000 to $3,500 |
| Insulation vacuum setup with sealed work area and filter bags, per visit | To keep the incident under control, national estimate for equipment staging on loose fill work, where it is billed separately. | $250 to $700 |
| Blown in insulation reinstalled to code depth, per square foot | With the scene stabilized, national estimate. To keep the incident under control, depth and R value are set by your local code and climate zone. | $1.50 to $3.50 |
| New faced batts supplied and installed, per square foot | With the scene stabilized, national estimate for walls, floors and accessible joist bays. | $1.00 to $2.00 |
| Crawl space floor batts removed and replaced with new supports, per square foot | As the coordinated steps continue, national estimate covering removal, new hangers and fresh faced batts. | $2.00 to $4.50 |
| Saturated open cell spray foam cut out of a cavity, per square foot | With the scene stabilized, national estimate. With the scene stabilized, closed cell foam normally stays and is not priced here. | $2.00 to $5.00 |
| Debris removal and disposal, per container load | With the scene stabilized, national estimate. As the coordinated steps continue, contaminated loads go to controlled disposal and sit at the top of the range. | $400 to $900 |
| After hours or overnight dispatch charge | To keep the incident under control, national estimate applied once per emergency call out, not per crew member. | $100 to $400 nationally |
Square footage inside the wet area
As the coordinated steps continue, everything scales with area, so an accurate boundary is the cheapest thing on the job.
Material type
From the first status check, batts pull out fast, blown in loose fill needs a vacuum and filter bags, and saturated open cell spray foam has to be cut.
Water category
From the first status check, clean water material is ordinary construction waste. With the scene stabilized, drain water, sewage and floodwater material needs sealed bagging, controlled disposal and cavity treatment.
Access and headroom
From the first status check, a stand up basement is quick.
Weight and disposal volume
To keep the incident under control, wet insulation weighs several times its dry weight, so container loads fill faster than people expect.
Whether removal happens with other demolition
With the scene stabilized, wall batts taken out while a flood cut is open are usually priced inside that removal line.
Why timing matters
From the first status check, water can keep moving into nearby materials even when the surface looks dry.
From the first status check, saturated material holds water directly against framing and sheathing and releases it slowly.
To keep the incident under control, cellulose and matted batts that packed down under the weight of water stay packed down.
From the first status check, cellulose, cotton batts and kraft facing are all food sources, and microbial growth can begin within 24 to 48 hours while damp.
From the first status check, soaked material resting on ceiling board turns an insulation problem into a load problem.
Helpful service information
With the scene stabilized, start with the short explanation. From the first status check, open a card if you want a little more detail.
What differs between materials is whether the incident is temporary or permanent.
Insulation works by holding still air inside a structure, so anything that replaces that air with water stops the material working.
To keep the incident under control, compaction, because material that lost its loft cannot get it back.
From the first status check, there are only four honest reasons to remove insulation after a water loss.
To keep the incident under control, rigid foam board is usually washable and reusable, since closed cell material does not soak water into its core.
With the scene stabilized, the foams are their own conversation. To keep the incident under control, rigid foam board is usually washable and reusable, since closed cell material does not soak water into its core.
Help near you
Choose your area below, or call (855) 876-9548 and describe how the incident started.
You may also need
Our incident command team finds and dries moisture in attic insulation, framing, and ceilings after roof leaks, condensation, or plumbing failures.
Get a Quote: (855) 876-9548Our incident command team pumps out crawl-space water, removes wet debris or insulation, and dries framing to control moisture beneath the home.
Get a Quote: (855) 876-9548Our incident command team removes a controlled lower section of wet drywall so contaminated cavities can be cleaned, inspected, and properly dried.
Get a Quote: (855) 876-9548Our incident command team finds moisture inside walls and uses targeted drying or controlled removal to protect framing and nearby finishes.
Get a Quote: (855) 876-9548Our incident command team uses air movement, dehumidification, and moisture monitoring to dry framing and building materials beyond the visible surface.
Get a Quote: (855) 876-9548Our incident command team removes water beneath the home, clears wet debris or insulation, and dries joists, subflooring, and foundation areas.
Get a Quote: (855) 876-9548Our incident command team identifies the water source, measures visible and unseen moisture, documents damage, and recommends an appropriate cleanup and drying plan.
Get a Quote: (855) 876-9548Our incident command team targets odors left after water damage by removing wet materials, cleaning affected surfaces, and controlling remaining moisture.
Get a Quote: (855) 876-9548Common questions
To keep the incident under control, no, and the answer depends entirely on the material. As the coordinated steps continue, blown in cellulose mats down permanently and comes out.
With the scene stabilized, not permanently from clean water. As the coordinated steps continue, fiberglass itself does not absorb water into the glass, so a batt that dries and regains its loft performs again.
As the coordinated steps continue, because cellulose is ground paper. To keep the incident under control, it absorbs water into the fiber, packs down under the weight, and stays packed once dry, so the loft that did the insulating is gone.
From the first status check, nationally, removal and disposal run about $1.00 to $2.50 per square foot. As the coordinated steps continue, a whole attic of blown in material vacuumed out typically lands between $1,000 and $3,500.
With the scene stabilized, with an insulation vacuum. With the scene stabilized, a large hose runs from the attic to a machine and filter bags staged outside, so the material never travels through your rooms loose.
To keep the incident under control, do not do this in an attic or a crawl space. With the scene stabilized, attics combine live wiring, junction boxes, extreme heat and ceiling drywall you can fall through, and every year people are hurt doing exactly this.
To keep the incident under control, much heavier than it looks, because it is carrying water rather than air.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our incident command team assess homes, businesses, and managed properties throughout Texas and nearby communities.
View the area on Google Maps